Hydro Jetting Services vs. Traditional Drain Cleaning

Have you struggled with stubborn drain clogs that just won't go away? Picking the right way to take care of tough blockages is important for your plumbing system. There are two main ways people use to fix this: hydro jetting services and traditional drain cleaning. Both ways are made to get your drains flowing again, but the way they work and what you get from them can be very different. Advanced Drain Cleaning, Inc wants to help you figure out the good and bad about each one, so you can choose which drain cleaning method is right for your plumbing.

Let’s take a closer look at how these cleaning techniques work and see what makes each one different.

Understanding Drain Cleaning Methods

When you deal with blocked drainage, choosing the right drain cleaning method is very important if you want long-lasting results. Drain cleaning can use different ways, like old mechanical tools and new ideas such as hydro jetting. Each way comes with its own good points and problems that depend on what kind of blockages you face.

Stubborn blockages, like grease buildup or tree roots, can mess up your plumbing system. If you know how tools, such as snakes, manual tools, or strong water jetting, work to clear these issues, you can keep your drainage clean and let your plumbing work well.

What Is Hydro Jetting?

Hydro jetting is a new way to clean drains using strong water pressure. It works by pushing water through a hose with special nozzles into your pipes. The water comes out fast, at about 4,000 psi. This strong force helps clear out grease, debris, and blockages from the inside of sewer lines and drainpipes.

So, why does hydro jetting work so well? The high water pressure gets rid of tough clogs that other methods may not. It also washes out the sludge that can stay behind when you use old cleaning ways. Even tree roots can be broken up and pushed out using this high psi water pressure from hydro jetting.

This jetting method is a good choice for people who want an eco-friendly way to clean out their plumbing or sewer lines. It is safe for most pipes. Hydro jetting gives your system a deep clean without causing damage to the pipes.

What Is Traditional Drain Cleaning?

Traditional drain cleaning uses basic tools and manual work to get rid of blockages and buildup in pipes. The most common way is for plumbers to use things like plumber's snakes or drain augers. These mechanical drain cleaning tools let them push or pull out what is stuck in the pipes. You often see these work well for hair, small bits, and lighter blockages. But, when you have thick grease or roots, these tools may not be able to clear away all the buildup.

A big problem with traditional drain cleaning is that it often makes a small opening rather than clearing the full diameter of the pipe. So, even if some water flows again, there can still be grease or other stuff left inside that will lead to blockages coming back later. Plumbers usually do this type of basic work when pipes only need simple care or when things are not too bad.

Even with these issues, mechanical drain cleaning still helps in some cases. If your pipes are old, cracked, or too soft for the strong force of hydro jetting, using these gentler tools is a better choice. So, are mechanical ways as good as jetting for cleaning out obstructions and buildup? Let’s see which works best for your drain cleaning needs.

How Hydro Jetting Works

Effective hydro jetting starts with a video inspection to find blockages in sewer pipes. Special cameras give a clear look inside pipe walls, so you can see what and where the obstructions are.

After you know what is blocking the sewer, a hose with special nozzles sends out high-pressure water to break up and clean out debris. The system spreads the water across all of the pipe walls, making sure nothing is left behind. If there are stubborn clogs, the pressure can go up to get the best cleaning. Because of this, hydro jetting is a good, flexible way to remove blockages and keep your pipes clear.

The Technology Behind Hydro Jetting

Hydro jetting uses strong tools to fully clean pipes. At the center of this process is a water jetter. It makes high water pressure, up to 4,000 psi, to cut through stubborn blockages. The nozzles play a key role in how the system works. There are different nozzle types. You can pick the right one based on how bad the clog is and the pipe’s diameter.

Some nozzles have jets that point forward. These hit tough obstructions head-on. Others have jets on the sides or pointed to the back. This design lets them spray all around, so the inside of the pipe gets a 360-degree clean. If you need to tackle hard clogs like built-up scale, there are multi-directional nozzles. These help you use more control and reach more spots.

Hydro jetting can clean pipes from 1.5 inches wide up to 9 inches wide. That means this method works for small home drains, sewer lines, or even big sewer and industrial pipes. You get clean pipes without risk of harm, as you can adjust the water pressure to fit the job. This gives hydro jetting many good points compared to older ways of cleaning drains and pipes.

Typical Applications For Hydro Jetting

Hydro jetting works really well when you need to get rid of stubborn clogs and debris. People use hydro jetting the most for:

• Clearing grease and sludge from kitchen drains.
• Fixing slow or blocked sewer lines.
• Getting rid of tree roots in underground pipelines.
• Cleaning pipes after sediment buildup during repairs or renovations.

This hydro jetting method works on household drains, big commercial sewer systems, and city pipes. It’s also good for regular maintenance, so your pipes stay clear of obstructions over time.

Because hydro jetting can handle lots of problems, like grease clogs or tree roots, it is now one of the most efficient ways to fix plumbing issues in sewer lines and other pipes. That’s why so many people trust hydro jetting for their plumbing needs.

Comparing Effectiveness: Hydro Jetting vs. Traditional Methods

The way hydro jetting works is very different from old drain cleaning. Jetting uses strong water pressure to clean deep inside the pipes. It gets rid of tough clogs, stubborn blockages, grease, and other debris. It does this fast and well.

Traditional drain cleaning uses simple tools. These can have a hard time fixing tough clogs. You may need to try more than one time to clear out the pipes this way.

When you look at both ways, hydro jetting comes out on top. It is better for all kinds of jobs, even the big ones or the ones that keep coming back. It works best when you have really tough clogs or lots of blockages mixed with grease. But you might want to know which way is best for your tough clogs or specific pipe problems.

Which Removes Tough Clogs Better?



Hydro jetting and mechanical drain cleaning each do a different job. But if you are dealing with tough clogs, hydro jetting often works better. Here is a look at both: